![background image](http://html1.mh-extra.com/html/ibm/3454-fce/3454-fce_customer-install-manual_3327826039.webp)
© Copyright IBM Corporation 2020. Customer Install Guide, PDU
39
2. Attach the brackets (A) to the PDU with two M3x5 screws (B) per bracket. Use
screws that were provided with the rack mounting kit.
3. Attach nut clips (A) to the four locations on the rack mounting flanges where you
want to attach the PDU model.
Use nut clips that were provided with the rack mounting kit. See the following
Figure 15.
Figure 15. Attaching nut clips to the rack mounting flanges from the rear of the
rack
4. Align the PDU model with the opening in the side of the rack.
Then, while you hold the PDU model in place, attach the brackets to the nut clips
in the rack mounting flanges with four M5 screws (A) as shown in the following
figure. Use screws that were provided with the rack mounting kit.
Summary of Contents for 3454-FCE
Page 6: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 6 Safety...
Page 52: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 52 Figure 29 EPO Setup...
Page 67: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 67 Regulatory and Compliance...
Page 74: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 74...