![background image](http://html1.mh-extra.com/html/ibm/3454-fce/3454-fce_customer-install-manual_3327826025.webp)
© Copyright IBM Corporation 2020. Customer Install Guide, PDU
25
200 - 208 V
ac
30 A plug
(24 A
derated)
3 phase
delta
4.3 m (14 ft)
IEC 60309,
3P+G
430R9W
Mating
connector
type
430C9W
Latin
America,
Japan, and
Taiwan
“W” in the plug / connector / receptacle denotes watertight and may not be
required.
Modification of IBM-provided power
cords
Modification of IBM-provided power cords should only be done in rare circumstances,
because the power cords provided with IBM systems meet stringent design and
manufacturing specifications.
IBM encourages the use of an IBM released power cord because of the specifications
that must be met for both the design and manufacture of our IBM power cords. The
specifications, the components used in the design, and the manufacturing process is an
external safety agency approved process that is audited by safety agencies on a
periodic and ongoing basis to ensure quality and compliance with design requirements.
When a server leaves the manufacturing site, it is safety agency listed, therefore, IBM
does not recommend modifying IBM-provided power cords. In the rare circumstance
where modification of an IBM provided power cord is deemed essential, you should:
Discuss the modification with their insurance provider to assess the effect, if any,
on insurance coverage
Consult with a professional electrician regarding compliance with local codes
The following excerpts from the Services Reference Manual (SRM) explains IBM policy
on power cord alteration and the liabilities involved.
Summary of Contents for 3454-FCE
Page 6: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 6 Safety...
Page 52: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 52 Figure 29 EPO Setup...
Page 67: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 67 Regulatory and Compliance...
Page 74: ...Copyright IBM Corporation 2020 Customer Install Guide PDU 74...