Responding to error codes
65
Troubleshooting
1783
IDE Secondary Channel
Slave
Drive Error
1
Make sure the IDE signal cable is properly connected
to the drive and to the system board.
2
Make sure the drive power cable is properly
connected.
3
Enter the Setup Utility and make sure that the IDE
Secondary Channel Slave parameter setting is set to
Auto
. For information on using the Setup Utility, see
“Starting the Setup Utility” on page 74.
4
If the error still shows after performing the above
steps, the IDE drive may be defective. For more
information on using the Setup Utility, see “Using the
Setup Utility” on page 73.
1800
IRQ Setting Error
PnP ISA Card(s) Disabled
1
Enter the Setup Utility and set the Reset Resource
Assignments to
Yes
, then reboot the system.
2
If the error message reappears, determine which
onboard device is least necessary and disable it under
the Input/Output Ports menu in Setup.
For information on using the Setup Utility, see
“Starting the Setup Utility” on page 74.
1801
Expansion ROM
Allocation Failed
1
Enter the Setup Utility and set the Reset Resource
Assignments to
Yes
, then reboot the system.
2
Change the I/O expansion ROM address.
For information on using the Setup Utility, see
“Starting the Setup Utility” on page 74.
Error code and description
Here’s what to do...
If any of these problems continue after taking the actions
listed, run the diagnostics programs that came with your
computer. If you need service, see “HelpWare support and
services” on page 81.
Summary of Contents for 2274
