Table 41. Diagnostic error messages (continued)
Message
Failing test
Description
Probable cause
Action
DIAG-MEMSZ
Err#0111
ramTest
The memory size to be tested is
less than or equal to zero.
System board failure
1
DIAG-MEMORY
Err#0110
ramTest
Data read from the RAM location
did not match previously written
data into the same location.
CPU RAM failure
1
DIAG-NOSEGMENT
Err#3081
Err#3881
crossPortTest
spinSilk
The port failed to go into loopback
mode.
Improper GBIC or
cable connection
Reseat the
GBICs and
cables and
re-execute
the test
DIAG-PORTABSENT
Err#2670
Err#3070
Err#3870
portLoopbackTest
crossPortTest
spinSilk
The port is not present.
ASIC or system board
failure
1
DIAG-PORTDIED
Err#265F
Err#305F
Err#385F
portLoopbackTest
crossPortTest
spinSilk
The port was in loopback mode
and then went inactive.
ASIC, GBIC module,
or fiber cable failure
2
DIAG-PORTM2M
Err#3080
Err#3880
crossPortTest
spinSilk
The port is found to be conneced
to itself (self loopback). This port
M to port M connection is not
allowed by this test.
Improper cable
connection
Reconnect
port (M) to
another
port (N)
and
re-execute
the test
DIAG-
PORTSTOPPED
Err#3874
spinSilk
The port is no longer transmitting,
as indicated by the number of
frames transmitted counter being
stuck at N frames.
ASIC, GBIC module,
or fiber cable failure
2
DIAG-PORTWRONG
Err#3078
crossPortTest
The frame was erroneously
received by port M instead of the
intended port N.
ASIC failure
1
DIAG-
POST_SKIPPED
Err# 0004
switch initialization
The POST is skipped. It’s
message recommended that
POST be performed.
Informational only
None
required
DIAG-REGERR
Err#0B15
Err#0415
portRegTest
sramRetentionTest
Data read from the ASIC register
or the ASIC SRAM did not match
the data previously written into the
same location.
ASIC failure
1
DIAG-
REGERR_UNRST
Err#0B16
Err#0416
portRegTest
sramRetentionTest
The port failed to unreset.
ASIC failure
1
124
IBM SAN Fibre Channel Switch: 2109 Model S16 Installation and Service Guide
|
|||||
|
|
||
|
||
|
|
||
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
||
|
|
|
||
|
|
||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|||
Summary of Contents for 2109 - SAN Fibre Channel Switch Model S16
