IBM 2109 - SAN Fibre Channel Switch Model S16, Service Manual

Page: 25 / 178

Chapter 2. Customer planning
The following information will be needed to properly configure the 2109 in an
operational environment.
Table 6 shows an example of a completed worksheet for an installed switch.
Following Table 6 is an explanation of each item in Table 6. Table 7 on page 11 is a
blank worksheet for your use. Make as many copies of Table 7 on page 11 as you
need to plan the installation of each of your switches. Provide the system
administrator with copies of the completed worksheets
Table 6. Example of a planning worksheet for a 2109 switch
Item Description
Firmware level V 2.1.7
Firmware location:
Server name
Username
Directory
C02STOR01
sanman
G:\sanman\2109\firmware\v2.1
Switch name 2109-1
Domain ID 1
FCnetID (Fibre-channel IP address)
FC netmask
WWN To be supplied when box is turned on
Role Principal switch
Syslog daemon IP address 192.20.236.4
Users defined - access level admin - admin, petuser - none
SNMP information:
System description TestSANlet1_2109-1
System contacts (Contact name)
System location B/003-3 Col C-4
Event trap level 0 - 5 5
Refer to the IBM SAN Fibre Channel Switch
2109 Model S16 User’s guide for additional
information.
Enable authentication traps No
RW community string dingo
RO community string pet
Trap recipients IP Address 192.20.236.3
License keys Required for optional features.
The following is a description of the items in Table 6.
Firmware levels
The firmware levels for the 2109 and the required code that the service
representative is to install on an NT StorWatch Specialist workstation.
© Copyright IBM Corp. 1999, 2000
9
|
|
|
|
|
|
|
|
|
||
||
||
|
|
|
|
|
|
|
|
||
||
||
||
||
||
||
||
||
||
||
||
||
|
|
|
||
||
||
||
||
|
|
|
|
|