IBM 2109 - SAN Fibre Channel Switch Model S16, Service Manual

Page: 131 / 178

The command syntax:
supportShow <firstPort>, <lastPort>, <numLog>
Where:
<firstPort>
Determines the first port of the range of ports to print information. The
default (if no operand is specified) is to print the state of port 0. If only
firstPort is specified, only the information for firstPort prints.
<lastPort>
Is the last port of the range of ports to print information. If firstPort is
specified but lastPort is not specified, it defaults to printing firstPort only for
the port based commands (portShow, portRegShow, portRouteShow).
<nLog>
Is the number of lines of portLogDump to print:
v 0
means print all lines (default)
v N
means print the last N lines
v <0
means skip portLogDump
switch:admin> supportShow
VxWorks:
5.3.1
Firmware: v2.2
Made on: Fri Mar 19 16:29:55 PST 1999
Flash: Fri Mar 19 16;30:19 pst 1999
BootProm: Tue Dec 29 17:32:38 PST 1998
none:
No licenses
28 29 30 29 27 Centigrade
82 84 86 84 80 Fahrenheit
Power Supply #1 is absent
Power Supply #2 is OK
Figure 61. supportShow command example
Appendix B. Diagnostics
115
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|