4.
Hanging/Assem. Gates & Barriers
4.1.2.
Fit blue plastic inserts into the top
and bottom of the Primary gate element
hang stile.
See Fig 16
4.1.3. Insert M24 eyebolts into
1st
and
3rd
hanging holes (finger tight). See Fig 17. Install
to Nominal 75mm. See Fig 17a
Fig 15
4.1. Primary Element Hanging Guide
9
Fig 15
TOOLS REQUIRED:
Ø36mm Open end spanner or adjustable spanner
Hammer
5mm Allen key
4.1.1.
Fit brackets to post before hanging gates or barriers, see Fig 15 detailing typical set
-
up for
hanging AG
-
fit
primary element onto post (NO RISE). First fasten the top bracket using Fig 15a for
setting up measurement.
Note: add 305mm to 97mm referencing
2.3.2. Flipping Gates/Barriers For 305 Rise
on page 6
.
Fig 15a
Fig 16
Fig 17a
Fig 17
1001270
Volume 3.1
Issue Date: March 2021
