3.3. Timber Board Brackets
8
TOOLS REQUIRED:
Ø19mm Open end spanner or adjustable spanner
Timber Board Bracket
When timber boards are required to hold back bedding use these bolt on brackets to fix 225mm
wide x 75mm thick timber flush to post edge as shown in Fig 12.
Note:
Flat board plate on scrape side and formed board plate on bedded side.
Brackets are supplied with M12 fittings for bolting to 100x100 or 120x120 posts.
TIP:
Allow 25mm clearance from floor
level to underside of bracket.
Timber Channel Bracket
Bracket to be bolted direct to post or stanchion (min. flange 133mm) to provide support for
timber board as shown in Fig 13 and 14.
Note:
Post and stanchion will need drilling
Fig 14
-
bolting to stanchion
edge (min. flange 133mm)
Fig 13
-
bolting to post
on centreline
Fig 12
1001270
Volume 3.1
Issue Date: March 2021
