X2 Spring bolt fastenings allow user
to
adjust the creep aperture gap
from 120mm min. to 595mm max.
Simply lift up both top and bottom
spring bolt handles to release from
original bolt position, then slide the
creep rail restrictor bar to your
desired gap size and insert spring
bolts back into the nearest bolt
position to lock into place.
Bolt positions at 95mm increments
Restrictor Bar
Calf Creep Insert User Guide
16
Fig 33
1001270
Volume 3.1
Issue Date: March 2021
Calf Creep Spring Bolt Assembly Guide
A separate fittings kit contains components
for the dual spring bolt fastenings
-
as
detailed in Fig 34
For assembly instructions refer to
4.3. Spring
Bolt Assembly
on pages 12
-
13 and also be
sure to
add the additional end cap to close
off both open ends of the spring bolt sleeve
.
Fig 34
