6.2.4. Fit the service cover, screwing through the back and sides of the trough into threads found in
the cover using M6x10 setscrews provided. See Fig 54 & 54a
25
Fig 54
Fig 54a
1001270
Volume 3.1
Issue Date: March 2021
6.2.5. To assemble the Valterre tank type valve.
Start by removing the nuts and bolts off the
valve body. The bolts supplied with the valve
are too short as a result need discarding and
replacing with X4 M6 x 70mm bolts (B003 3060
70) located in the fittings bag. See Fig 55
Fig 55
6.2.6. Place the rubber
‘
O
’
ring inside the valve
seat recess. See Fig 56
Fig 56
