3.
AG
-
fit
Post Brackets
3.1. Bracket Design
The bracketry for the AG
-
fit
range is designed for clamping onto post. There are a wide variety of
AG
-
fit
brackets available to suit different applications on
-
site, this system allows users to create
their ideal setup
.
See Fig 10
The hanging brackets are not only used to hang the AG
-
fit
range of gates and barriers but can also
be compatible with other IAE ranges such as the YokeMaster panels and the VisorDrink® troughs.
You will find bracketry available to hang multiple panels or gates onto a single posts as well as a
variety of slam brackets to enable maximum flexibility on site.
A separate bracket fitting
kit contains M12 fittings
and polymer protector
caps for securing
clamping to the post. See
Fig 11
Always fit the polymer
protector caps before
fitting bolts and nuts.
3.2. Bracket Assembly
7
Fig 10
TOOLS REQUIRED:
Ø19mm Open end spanner
TIP:
Fit the clamp brackets
loosely at first, adjust to suit
your application and then
tighten.
TORQUE SETTINGS
:
40Nm
for all post clamps
Fig 11
1001270
Volume 3.1
Issue Date: March 2021
