4.7. Assembly Of Back
-
to
-
Back Primary
1
17
The elevation below illustrates a complete barrier made up of 3 separate sections comprising of; a
Panel Insert, a Back
-
to
-
Back Primary and a Squeeze Gap Insert. Several different permutations can be
created by combining two inserts and one Back
-
to
-
Back Primary, not all can be covered here but the
method for assembly is always the same.
Assembly Method
Hang section 1 to begin set
-
up referencing
4.1.
Primary element hanging guide
on pages 9
-
10
,
next
insert section 2 (Back
-
to
-
Back Primary) followed by section 3, refer to
4.2. Insert element hanging
guide
on pages 11
-
12 to fix both section 2 and 3.
IMPORTANT
:
Inserts requires minimum 305mm insertion
into Back
-
to
-
Back Primary.
Fig 35
2
3
1001270
Volume 3.1
Issue Date: March 2021
