6.2.1. VisorDrink trough is supplied with the visor
already assembled and bolted shut. Remove and
discard the bolt
highlighted
in Fig 51 to access
the loose components bagged up inside.
6.2.2. Insert a loose bolt or similar into the hole
highlighted
to hold the visor backward whilst
assembly of the loose components takes place.
See Fig 52
24
6.2. Water Supply Install
1001270
Volume 3.1
Issue Date: March 2021
TOOLS REQUIRED:
Ø10mm Ring spanner
Fig 51
6.2.3. Fit Flowmasta float to RXP valve supplied
and offer up to 26 diameter hole in the side of
the trough which is closest to your water supply.
See Fig 53
MAINTENANCE INFO:
Avoid over tightening of plumbing
connections to prevent damage.
Always use Teflon tape (not supplied) on
threaded connections to prevent leaks.
Fig 53
Fig 52
IMPORTANT
:
Blanking caps are
NOT
provided for closing off the
redundant holes on the opposite end to where to
float valve is fitted.
