1M
2M
3M
4M
5M
6M
Slam
100x100
100x100
100x100
100x100
100x100
100x100
Single Hang
100x100
100x100
100x100
100x100
120x120
120x120
Double Hang
90 deg
100x100
100x100
100x100
120x120
120x120
150x150
Double Hang
Inline
100x100
100x100
100x100
120x120
150x150
150x150
Triple Hang
100x100
120x120
150x150
150x150
150x150
150x150
Quad Hang
100x100
120x120
150x150
150x150
150x150
150x150
2.1. Post Selection
It is important to consider post selection at the
beginning of an AG
-
fit
project install. The AG
-
fit
posts
are available in a variety of different widths and lengths,
to ensure that you have selected the right post for your desired application you must consider
the following:
-
•
Gate or barrier length, see table below
•
Post type i.e. hang or slam, see table below
•
Height out of ground
Gate / Barrier Length (0.55M
-
6M)
IMPORTANT
:
Before inserting posts into ground be sure
to consider both; the depth of bedding
underneath (where 305mm rise is required
2440mm post must be used) and any steps
caused by discrepancy in the floor level.
Heights Out Of Ground
Gates and barriers hanging at
1525mm as standard,
use a 2135mm
post set 610mm deep into ground.
Gates and barriers with a 305mm rise
hanging at 1830mm
, use a 2440mm
post set 610mm deep into ground.
Feed fence standing at 1370mm as
standard,
use a 1830mm post set
460mm deep into ground.
Post Width
(mm)
Post Length
(mm)
Code
Pack Size
100x100
1830
F030 2012 13
8
100x100
2135
F002 2009 01
8
120x120
2135
F002 2009 03
8
120x120
2440
1000197
2
150x150
2135
F002 2009 05
2
150x150
2440
1000193
2
2
2.
Post Installation
3
Guide For Available Posts;
-
1001270
Volume 3.1
Issue Date: March 2021
