4.3.2. Slide both the top and bottom spring bolts through the hole in the slam stile. See Fig 25
4.3.3. Screw the bolt handle into the hole
located on the spring bolt, positioning it
between the washer and the inside of the slam
stile (as per Fig 26a) to complete the assembly
for the top and bottom spring bolts. See Fig 26
4.3.4. Offer the slam stile up to the post slam
brackets, check the bolt positions are inline with
the receiver slots, adjust the clamp brackets to
suit and then tighten brackets to the post.
See Fig 27
13
Fig 25
PADLOCKABLE SPRING BOLTS:
Spring bolt cages feature an eyelet at the
cap end as standard for locating a padlock
(padlock not supplied).
Fig 26
Fig 27
Fig 26a
1001270
Volume 3.1
Issue Date: March 2021
