I.R.I.S. POWERSCAN 9.5, User Manual

Page: 86 / 182

Chapter 5 – Project Setup
78
Testing barcodes and OCR zones
You can test the reading of your barcodes and OCR zones. The
extracted values will be displayed in the
Barcode and OCR values
window.
To test a selected barcode or OCR zone:
•
Select the barcode or OCR zone on the template image and click
on
Test Selected Barcode or OCR Zone .
To test all barcodes and OCR zones:
•
Click on Test all Barcodes and OCR Zones .
Note:
If a
barcode/OCR zone cannot be found for a zone, the zone is still included
in the value list with only the label and zone coordinates displayed.
Label : label of the barcode/OCR zone.
Type : type of barcode found. If the zone is an OCR zone, the Type
will be "OCR".
Confidence : confidence level (in percentage) of the barcode/OCR
value found.
Orientation : orientation of the barcode (with 0 degrees
representing a horizontal right-side up barcode).
Value : value of the barcode/OCR string.