I.R.I.S. POWERSCAN 9.5, User Manual

Page: 156 / 182

Chapter 7 – Index validation
148
I
NDEXING TASKS
Indexing operations
All frequent commands related to index validation are available
from the main toolbar or from the
Tasks pane (if necessary, use the
blue arrows to the right or to the left at the bottom of the pane to
access the next indexing tasks).
To validate an index value:
Once you have modified an index value in the Index pane, you
must directly validate it to make it valid for the application.
•
Once you have set the correct indexing value, click on Validate
on the main toolbar or on Validate in the Tasks pane. The
value becomes valid.
To undo the last modification:
At any moment in time, you can remove the values that have just
been changed in the indexing fields. You will then come back to the
previous index values.