I.R.I.S. POWERSCAN 9.5, User Manual

Page: 42 / 182

Chapter 3 – Starting up
34
•
Select the required options in the Project Export window and
choose a destination folder for the export.
-
Export scan cache images : select this option if you want the
scan cache images to be exported (this is necessary if you still
need to work on the images).
-
Export emulation images : select this option if you want to
import the emulation images of IRISPowerscan.
-
Export settings of scanners : select this option to import the
scanner settings of your project.
•
Click on Export . The project is exported and becomes available
as a *.ips file*.
(*) In case of a project to be shared with other users, transmit the *.ips file to the
other users.
Tip :
If the project to be imported into IRISPowerscan was created with Kodak
Capture Software 6*, you must also make an export/import using the
IRISPowerscan interface. In the
Project Export window, select the tab
From Kodak Capture Software ., then click on Export .
(*) This is only possible if Kodak Capture Software is installed on the same
workstation as IRISPowerscan.