I.R.I.S. POWERSCAN 9.5, User Manual

Page: 138 / 182

Chapter 6 – Scanning
130
R
UNNING EMULATION IMAGES
IRISPowerscan is also provided with emulation images. These can
be used for demonstration or testing purposes. You can run the
emulation images to make a few tests before you start with the
actual production scanning process.
The Emulation Mode that enables to run these emulation images is
activated by default. If you connect a scanner, however, the
Emulation Mode becomes disabled.
To reset the Emulation Mode:
•
Select Scanner , Setup , from the Settings drop-down menu
(either from the Start up window, or from the user interface).
•
Select Emulation Mode in the Scanner Setup dialog box.
To run the emulation images:
•
Make sure the application is set to run in Emulation Mode (see
above). The big blue Scan button on the main toolbar turns into a
small one.
•
Click on Scan , then Start in the drop-down menu to scan the
emulation images.