I.R.I.S. POWERSCAN 9.5, User Manual

Page: 79 / 182

IRISPowerscan
TM
– User Guide
71
barcode that started the new document.
(This is important when inserts are used for the purpose of
document separation and do not contain any significant information.
The barcode, however, is still available for document level
indexing).
(Remember to select
Rotate based on barcode if you want to
rotate all the pages in the document in the in the same orientation as
the orientation of the barcode of the document.
Note: Rotate based on barcode is not available if the barcode
separator page is deleted).
Create attachment : check this option to create an attachment with
the defined barcode.
(Remember to fill in the
Keep barcodes with mask and/or
Minimum length fields if you wish to restrict the attachment to a
specific barcode value or mask).
Delete page and attach next : check this option to delete the page
(both front and rear) containing the barcode and to use the next page
as the attachment.
(Remember to select
Rotate based on barcode if you want to
rotate the attachment (both front and rear) in the same orientation as
the orientation of the barcode on the page.
Important
The
Create attachment option is only valid for one attachment page. If
multiple attachments are required, then an attachment barcode must be
applied to each attachment.
The barcode on the attachment page is not available for indexing.
Separation triggered by change of value : check this option if you
want the separation to take place only if the barcode value changes.