N700 Operating Instructions and Parts Manual
5. Explanation of d-Group Function
43
5.7
Output torque monitor (d007)
(1) This inverter displays the output torque estimation value.
(2) In case of displaying d007, the monitor lamp "%" is illuminated.
-300 ~ 300 : Display is in 1% unit
Note)
Display substitutes only at the time of SLV, V2, and 0Hz-V2 mode control.
5.8
Number of motor rotation monitor (d008)
(1) This inverter displays the rotation of motor at revolution per minute
(RPM : Rotational speed Per Minute).
0~9999 : Display is in 1 RPM unit.
Note)
d008 is displayed the calculated RPM with motor poles setting (F016).
5.9
PID Feedback monitor (d009)
(1) When you select PID function (01) in C022, the inverter displays the feedback value changed
by C026 (PID scale).
"Display of monitor part" = " Feedback quantity" x "PID scale"
(frequency command value) (C026)
0.00 ~ 99.99 : Display is in 0.01% unit.
100.0 ~ 999.9 : Display is in 0.1% unit.
1000 ~ 9999 : Display is in 1% unit.
5.10
Intelligent input terminal monitor (d010)
(1) The LED display will monitor the state of the intelligent inputs.
Example ) FW and Input intelligent terminal 1, 2, 7 : ON
Input intelligent terminal 3, 4, 5, 6, 8 : OFF
5.11
Intelligent output terminal monitor (d011)
(1) The LED display will monitor the state of the intelligent outputs.
Example ) Output intelligent terminal 11, 12 : ON
Output alarm AL, Relay output RUN, and Output intelligent terminal 13, 14: OFF
ON
OFF
11
12
13
14
RN
AL
(Black : Lights up)
(White : Lights out)
[Display]
