N700 Operating Instructions and Parts Manual
4. Parameter Code List
25
4. P
ARAMETER
C
ODE
L
IST
4.1
About Digital Operator
The inverter operates by using the digital operator OPE-N7, which is fitted as standard.
4.1.1
Name and contents of each part of Standard-type digital operator (OPE-N7)
(1) Part
name
[OPE-N7 Part name] [OPE-N7 External]
Fig. 4- 1 OPE-N7 Part name and External View
The front panel controls and indicators are described as follows:
Name
Indication
Contents
Display window
7-Segment
A 4-digit, 7 segment display for parameters and function
codes
POWER LED
(Power lamp)
POWER
This LED is ON when the power input to the inverter is on.
RUN LED (Running
lamp)
RUN
ON when the inverter output is on and the motor is
developing torque, and OFF when the inverter output is off
(STOP Mode).
PRG LED
(Programming
lamp)
PRG
This LED is ON when the inverter is ready for parameter
editing(Program mode). It is normally OFF when the
parameter display is monitoring data(Monitor mode).
Monitor indicator
(Monitor lamp)
Hz/A/V/
㎾
/%
Lamp that marks monitor department's indication state
Hz : Frequency, V : Voltage, A : Current,
㎾
: Electric
power (both V and A LED will be ON), % : Rate
READ function key
READ
The key to read the inverter parameter to the operator.
COPY function key
COPY
The key to copy the operator parameter to the inverter
UP/DOWN key
The key to change extension mode, function mode and set
value.
FUNCTION key
FUNC
The key containing monitor mode, basic setting mode,
extension functions mode.
