N700 Operating Instructions and Parts Manual
4. Parameter Code List
27
Note1) Please press the key to write the new value to the memory after data
modification.
Note2) To edit the parameters, the inverter must be in Program mode(PRG LED will be
ON).
[UP/DOWN key(
/
)]
: Use these keys alternately to move up or down the lists of
parameters and functions shown in the display, and
increase/decrease values.
[Run key(RUN)]
: Press this key to run the motor. Parameter F009 determines
the rotor direction of the motor (FWD or REV).
[Stop key(STOP)]
: Press this key to stop the motor when it is running. This key
will also reset an alarm that has tripped.
③
keypad navigational map 2(Setting method of function and code values)
Changes operation command parts and sets the output frequency value.
