![background image](http://html.mh-extra.com/html/hyundai/20bc-7/20bc-7_service-manual_2196423037.webp)
2-14
Mounting bolt
Put a block under the rear axle, support
on a truck, and raise the frame with a
crane. Remove the mounting bolts
installed to the frame, and pull out to the
rear. There are shims between the
support and rear axle to prevent play.
(3)
B207RE40
INSTALLATION
Installation is in the reverse order to removal,
but be careful of the following points.
When replacing the bushing at the support,
install so that the hole in the bushing faces
down.
2)
(1)
Bushing
Support
Support
Bushing
B207RE39
B207RE41
Install the support so that the clearance is
under 0.5mm when the support is pushed
fully to the rear.
Tightening torque of mounting bolt for
support.
Â
55~61kgf
Â
m(398~441lbf
Â
ft)
(2)
When installing the rear wheel, coat the hub bolt with molybdenum disulphide, and tighten the nut
to 6~9kgf
Â
m(43~65lbf
Â
ft).
When installing the counterweight, align with the center of frame. Coat the mounting bolt with
molybdenum disulphide and tighter.
(3)
(4)