![background image](http://html.mh-extra.com/html/hyundai/20bc-7/20bc-7_service-manual_2196423179.webp)
7-27
Submenu "ADJUSTMENTS"
Set battery type : Selects the nominal battery voltage.
Adjust battery : Fine adjustment of the battery voltage measured by the controller.
Throttle 0 zone : Establishes a deadband in the accelerator input curve (see also curve below).
Throttle X zone : This parameter changes the characteristic of the accelerator input curve.
Throttle Y zone : This parameter changes the characteristic of the accelerator input curve.
SPEED f(Hz)
MAX SPEED
TROTTLE Y
POINT
FREQ. CREEP
VACC
MIN
THROTTLE 0
ZONE
THROTTLE X
POINT
VACC
MAX
V
20B7EL17
VACC MIN and VACC MAX are values programmable by the "PROGRAM VACC" function.
Adjustment #04 : This parameter determines the motor temperature level at which the "MOTOR
TEMPERATURE" alarm is signalled. This parameter must be adjusted only if
the "SET TEMPERATURE" (menu "SET OPTION") parameter is programmed
"ANALOG"
PWM on main contactor
-OFF: The inverter applies the battery voltage to the coil on A27 output.
-ON: The PWM reduces the voltage to the set value.
PWM on aux output
-OFF: The inverter applies the battery voltage to the coil on A29 output.
-ON: The PWM reduces the voltage to the set value.
MC/AUX PWM: It sets the PWM level in % on the outputs A27 and A29. Here is used to drive a
main contact for pump.
(2)