2-11
4. WHEEL BRAKE
REMOVAL
Front wheel
Put a block under the mast and tilt
forward, or jack up the bottom of the frame
to raise the front wheels off the ground,
then remove the front wheels.
(1)
Hub
nut
Block
Fork
down
Hub
bolt
Drive
shaft
1)
B207RE31
Drive shaft
Pull out drive shaft carefully with lock
washer, lock nut and oil seal.
Remove lock nut with a hub nut wrench.
(2)
Block
Fork
down
Hub
bolt
B207RE32
Brake, drum assembly
The oil seal inside the nub acts as a seal
for the axle shaft end. Therefore when
removing or installing the brake and drum
assembly, remove or install in a straight
line to prevent twisting the seal up and
down or to the right and left.
When the brake and drum assembly is
removed the oil seal is connected to the
inside of the hub.
(3)
Block
Fork
down
B207RE33
B153RE002
