7-15
INTERNAL INVOLUTE SPLINE DATA
3)
Item
Unit
Specification
Flat root side fit
No of teeth
Spline pitch
Pressure angle
Major diameter
Form diameter
Minor diameter
Pin diameter
-
EA
mm
Degree
mm
mm
mm
mm
Class 7
11
16/32
30
19.7104
19.1516
16.0274
2.743
MAINTENANCE INSTRUCTION
Before starting the maintenance please disconnect the power supply.
Ball bearing
Both ball bearing are maintenance free. Should it be necessary to remove the bearings in case of
repair, they should be replaced. In any case the sealing parts (shaft sealing ring etc.) have to be
replaced.
If a bearing which is to be replaced has only one sealing lip, this should be greased with quality
bearing grease.
After approximately 10,000 operating hours the bearings have to be replaced.
Disassembly and assembly
The motor is assembled and disassembled according to the relevant sectional drawing and part
list. (See page 7-14)
ö
(
(
1)
(2)
4)
SPECIFICATION
2)
Item
Unit
Specification
Type
Rated voltage
Rated output
Insulation
-
V
kW
-
TSA200-230
32
18
Class F