2-8
INSTALLATION
Installation is the reverse order of removal,
but be careful of the following points.
Tighten the mounting bolts and apply
loctite #277.
Â
Drive axle
48~53kgf
Â
m(347~383lbf
Â
ft)
Â
Drive motor
6~8kgf
Â
m(43.4~57.9lbf
Â
ft)
(1)
2
2
)
Drive axle and motor assy
Attach a crane to the tilt cylinder notches
on the dashboard and raise the machine
enough for truck to slide under drive axle-
transmission-drive motor assembly.
Put the block between the truck and drive
axle assembly.
Disconnect the harness from the drive
motor terminal.
Remove drive axle mounting bolts from
the frame and then slowly pull out the
truck with drive axle forward the front.
(4)
Η
Θ
Ι
Κ
Axle
mounting
bolt
Drive axle &
motor assy
Crane
20BC7RE15
Remove five socket bolts holding the drive
motor in place.
Carefully remove the drive motor from the
drive axle.
Λ
Μ
Drive motor
Socket bolt
Drive axle
20BC7RE16