![background image](http://html.mh-extra.com/html/hyundai/20bc-7/20bc-7_service-manual_2196423173.webp)
7-21
Pump controller
(3)
A
VIEW A
A1
A13
A24
A12
A23
A35
Rubber cap
(No. of pin B1~B8)
35B7EL14
No. of pin
A1
A2
A3
A4
A5
A6
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
+12V
ENC GND
PPOT
SEAT
LIFT ENABLE
TILT UP/DOWN
AUX IN/OUT
SHIFT RGT/LFT
SBR
SR
SAFETY
ENC A
ENC B
NPOT
CPOT
CAN T
Function
Positive of encoder power supply.
Negative of encoder power supply.
Lift potentiometer positive: 10V output; keep load > 1k
ɮ
.
Seat presence signal; Active HIGH.
Input for potentiometer lifting enable input; it is active HIGH.
Input for tilt up and tilt down digital input; it is active HIGH.
Input for aux in and aux out digital input; it is active HIGH.
Input for shift right and shift left digital input; it is active HIGH.
Input for side battery removal digital input; Active low.
Speed reduction input. Active low.
If not connected to -batt the MC coil power output will be disabled. It can
also be used as a general purpose input.
Phase A of encoder.
Phase B of encoder.
Negative of accelerator unit, tested for wire disconnection diagnosis.
Lift potentiometer wiper.
CAN termination; connect to CAN H (A18) to insert can termination
resistance.
Description