![background image](http://html.mh-extra.com/html/hyundai/20bc-7/20bc-7_service-manual_2196423138.webp)
6-22
REPLACING SHAFT SEAL
22B7HS37
Take off snap-ring with proper tool.
(1)
2)
22B7HS38
Remove old shaft seal from the cover with
not sharp-end rod while paying attention
not to give any scratch on the surface of
shaft seal.
(2)
22B7HS39
Clean surface contact shaft seal.
(3)
22B7HS40
Smear grease on the hole for shaft seal
before fitting shaft seal into it to prevent
any damage on the surface of shaft seal
while inserting.
(4)