![background image](http://html.mh-extra.com/html/hyundai/20bc-7/20bc-7_service-manual_2196423099.webp)
5-21
ASSEMBLY
Assemble spool and sleeve.
When assembling spool and sleeve only
one of two possible ways of positioning
the spring slots is correct. There are
three slots in the spool and three holes in
the sleeve in the end of the spool / sleeve
opposite to the end with spring slots.
Place the slots and holes opposite each
other so that parts of the holes in the
sleeve are visible through the slots in the
spool.
5)
(1)
ö
Place the two flat neutral position springs
in the slot.
Place the curved springs between the flat
ones and press them into place (see
assembly pattern).
(2)
Line up the spring set.
(3)
5-76(1)
5-76(2)
5-76(4)
Guide the spool into the sleeve. Make
sure that spool and sleeve are placed
correctly in relation to each other.
(4)
5-77(1)