HySecurity HSG80F, Programming And Operations Manual

Page: 96 / 138

82 MX3636-01 Rev. D HydraSwing Programming & Operations © 2018
SECURE
PUBL
IC
D
F
PEDESTRIAN G
A
TE & WALKW
A
Y
SWING GATE
B
E
A
C
G
FREE EXIT
OR
OBSTRUCTION
LOOP
SHADOW
LOOP
Enter Exit
FREE EXIT
OR
OBSTRUCTION
LOOP
SHADOW
LOOP
OBSTRUCTION
LOOP
OBSTRUCTION
LOOP
L
OOp
L
ayOutS
: t
wO
L
ane
, B
i
-d
irectiOnaL
For Openings greater than 28 Feet
Uni-directional Single Lane
Vehicles
must pass from one loop to the next
without loss of detection.
Dimension “A” = 6 to 20 ft
(183 to 610 cm)
Dimension “B” = 6 to 8 ft
(183 to 244 cm)
Dimension “C” = Maintain 4 ft (122 cm)
Dimension “D” = Maintain 5 ft (152 cm)
between loop and edge of roadway. No
vehicle can pass through such a small
area and escape detection.
Dimension “E” = 4 ft maximum
(122 cm) Vehicles must be able to pass
from one loop to the next without loss of
detection.
Dimension “F” = Distance from gate to
free exit loop is gate panel length plus
4 ft (122 cm)
Dimension “G” = 4 to 6 ft (122 to 183 cm)
NOTE: A minimum of three (3) detectors are required for this
type of gate site scenario.
Two gate site scenarios
include access control entry
systems.
• Bi-directional system
with controlled access
entry (card reader, radio
control, etc.) and free
exit gate is closed by a
“TIMER TO CLOSE.”
• For an “entry only”
system, the free exit
loop is replaced by
an obstruction loop
(reversing loop).
Gate starts timing to close
as all loops are clear. Timer
is adjustable from 1 to 99
seconds.