108
MX3636-01 Rev. D
HydraSwing Programming & Operations
© 2018
H
ydra
S
winG
O
peratOr
m
aintenance
S
cHeduLe
Name of part
What to do
Weekly
Check at these recommended
monthly intervals
1
3
6
12
24
Gate and hardware
Check for damage and wear
*1
X
X
Anchor bolts & fasteners
Check and tighten, if loose. If
fasteners are worn, replace.
*2
X
X
Cylinder
Apply grease to zerk fittings
*2
X
Large Hydraulic cylinder
Grease end pin (50,000 cycles)
*3
X
Hydraulic cylinder (inside)
Grease bottom pin (100,000 cycles)
*4
X
Special Notes:
*1. Your gate and gate hardware requires maintenance. A damaged gate or worn hardware may cause slow or erratic operation
and will result in excess drive wheel wear. Lubricate gate hardware more frequently and check for smooth operation by
opening the toggle clamping mechanism and then pushing the gate manually. One person should easily be able to push all
but the largest of gates. Damaged or warped gate panels should be straightened or replaced.
*2. Grease the hydraulic cylinder zerk fittings every 50,000 cycles. Use NLGI #2 Grade Moly EP lithium base grease only and
apply with a standard grease gun.
*3. Grease the large hydraulic cylinder end pin as regular maintenance every 50,000 cycles or 1 year (whichever comes first).
*4. Grease the two zerk fittings on the hydraulic cylinder trunion bearing (inside, near base of the cylinder) regularly, every
100,000 cycles or 1 year (whichever come first).
Summary of Contents for HSG80F
