BOLTSCOPE PRO
- Bolt Tension Monitor
93
10) Press the
MENU
key multiple times to tab right, and the
ESC
key
multiple times to tab left, until the
AUTO
menu is highlighted and
displaying the submenu items.
11) Use the
UP
and
DOWN
arrow keys to scroll through the sub menu items
until
APPROX LEN
is highlighted.
12) Press the
ENTER
key to display the
Digits Edit Box
.
13) Press the
UP
and
DOWN
arrow keys to scroll the highlighted value.
14) Press the
LEFT
and
RIGHT
arrow keys to scroll the digit locations.
15) Repeat steps
10 & 11
until the
APPROX LEN
value is correctly
displayed.
16) Press the
OK
key to set the
Approximate Length
and return to the
menu screen, or
ESC
to cancel entering the
Approximate Length
.
17) Use the
UP
and
DOWN
arrow keys to scroll through the sub menu
items until
AUTO SET
is highlighted.
18) Apply a drop of couplant to the bolt or transducer, and attach it to one
end of the bolt. Rotate the transducer clockwise and counter clockwise
applying a small amount of pressure to eliminate any excess couplant
between the transducer and bolt surface.
Be sure to always place the
