BOLTSCOPE PRO
- Bolt Tension Monitor
31
1.
Reference Lengths
– When measuring reference lengths, will locate the
detection point (end of the bolt or target), and optimize the scope settings.
This feature will prove to be very valuable, avoiding the tedious process of
manually trying to locate the detection point.
2.
High Speed Update
– Activates the high speed update mode, when using
hydratight’s special shut-off box, installed and connected to a pump. This
feature can only be activated while measuring quantities other than the
reference lengths, and should only be activated if connected to the shut-
off box.
4.19 ON/OFF Key
The
ON/OFF
key simply powers the unit either
ON
or
OFF
. Note: Unit will
automatically power off when idle for 5 minutes. All current settings are saved
prior to powering off.
4.20 Top & Bottom End Caps
The top & bottom end panels are where all connections are made to the
BOLTSCOPE PRO
. The diagram above shows the layout and description of the
connectors:
Transducer Connector
Refer to Diagram:
The transducer connector, temperature sensor (option), and
battery cover/probe zero disk are located on the
BOLTSCOPE PRO’s
top end
