BOLTSCOPE PRO
- Bolt Tension Monitor
51
4) Press the
UP
and
DOWN
arrow keys to scroll through the material list
until the appropriate material is highlighted.
5) Press the
ENTER
key to display the confirmation screen.
6) Press the
OK
key to select the material and return to the menu screen,
or
ESC
to cancel the material selection.
Now that a bolt group has been created and material type selected to save and
document the probe zero data, this next section will go through the process of
obtaining the information needed to use the standard bolt for a probe zero
calibration bar.
Setting up a Bolt Standard – For the First Time
1) With the menu items already active, press the
MENU
key multiple times
to tab right and the
ESC
key multiple times to tab left until the
CAL
menu is highlighted and displaying the submenu items.
2) Use the
UP
and
DOWN
arrow keys to scroll through the sub menu items
until
ZERO MODE
is highlighted.
3) Use the
LEFT
and
RIGHT
arrow keys to scroll the zero mode options
until the
FIXED
option is displayed.
Note:
The fixed option sets the delay factor to zero. In other words,
disables the zero feature altogether.
