BOLTSCOPE PRO
- Bolt Tension Monitor
119
3) Press the
ENTER
key to run the calculation and display the confirmation
screen.
Note:
The regression or vector coefficient will be displayed. The closer
this number is to 1, the better the fit, or least amount of error.
4) Press the
OK
key to accept the calculation, or the
ESC
key to cancel
and return to the
CAL
menu.
5) Press the
MEAS
key to return to the measurement screen.
Note:
The new
Load Factor
and
Offset
values can be reviewed and
edited in the
GEOM
tabbed menu item.
6) Calibration is completed.
