HYDAC FILTER SYSTEMS GMBH
Performing Maintenance | 9
BeWa MFU-10P 4391553b en-us
91 / 124
9.4.1 Removing/mounting the push-in protective screen
No tools are required.
Fig. 29:
Removing/mounting the push-in strainer
100
Suction hose with quick coupling
700
Quick coupling on the filter unit
701
Seal ring for quick coupling
710
Protective screen, 300 µm
For disassembly, proceed as follows:
1.
Switch off the filter unit and remove the lance from the
container and/or close the shut-off device in order to
prevent any subsequent flow of the medium.
2.
Disassemble the suction hose. For details, see
ing/installing the quick coupling [
.
3.
Now remove the seal ring
(701)
and then the protective
screen
(710)
. In order to do this, insert your finger into
the opening and pull out the seal ring and then the pro-
tective screen with your finger.
O
Disassembly of the protective screen is complete.
Proceed as follows to install:
4.
For the assembly, inset the cleaned or new protective
screen
(710)
into the quick coupling on the connector
(IN)
until the stop.
5.
Now insert the seal ring
(701)
into the quick coupling.
1
2
3
4
5
6
7
8
9
10
A
