7 | Manual operation
HYDAC FILTER SYSTEMS GMBH
70 / 124
BeWa MFU-10P 4391553b en-us
7.3.3 Cleaning up to the required cleanliness class
In order to clean oil in an oil tank/container to the required
cleanliness class. proceed as follows.
Fig. 27:
Example of application: Cleaning up to the required cleanli-
ness class
The setting of the limit value of the target cleanliness in the
ContaminationSensor
has no effect on the operation of the fil-
ter unit. An automatic switch off of the filter unit after the limit
value of the target cleanliness has been reached, is not ac-
tive.
ü
Select the right filter element for an operating mode and
exchange this according to Chapter
1.
Connect the suction hose to the oil tank/container and fit
the suction hose in it and also secure it against falling
out.
1
2
3
4
5
6
7
8
9
10
A