HunterDouglas Skyline PowerView, Installation Operation Care

Page: 15 / 60

INSTALLATION
13
■
With the mounting clips in place, mark
the dust cover through the center holes
of the mounting clips.
■
Remove the mounting clips and drill the
holes in the dust cover.
■
Hold the dust cover in place on the
mounting surface and mark through
the holes.
■
Set the valance aside.
■
Use a
3
∕
32
" drill bit to drill the screw holes.
CAUTION:
Do not mount into drywall,
only mount into wood.
■
Hold the valance in place against the
mounting surface.
■
Insert a screw through a mounting clip
and the dust cover at each hole location.
Proceed to “Mount the Headrail” on page 23.
Release
Tab Toward
Window
Return