INSTALLATION
24
Spliced Headrails without Fabric-Wrapped Large Cassette
CAUTION:
For spliced headrails, one person should hold each section.
■
Orient the headrail so that the control side is located on the correct side.
■
Mount the half with the attached headrail splice clip first.
■
Center the first section of headrail
underneath the mounting clips.
■
Starting with the center, tilt the headrail and
engage it under the lip of the mounting clips.
■
Rotate the headrail upward and snap it
into place.
■
Make sure the headrail is secure, then align
the second half of the headrail and abut it
against the mounted half.
IMPORTANT:
Ensure a mounting clip is
adjacent to both sides of the splice on
the headrail.
■
Hook the front lip of the headrail splice clip onto the headrail.
■
Rotate the headrail upward to snap it into place.
Spliced Headrails with a Fabric-Wrapped Large Cassette
CAUTION:
For spliced headrails, one person should hold each section.
■
Orient the headrail so that the control side is located on the correct side.
■
Mount the half with the attached headrail splice clip first.
IMPORTANT:
The headrail splice clip will need to be
attached prior to installation into the cassette, and the
clip will need to be oriented with the release tab
forward (into the room) as shown.
Room
Hook Lip
Mounting
Clip
Headrail
Snap into Place
Room
Headrail Splice Clip Front Lip
First Hearail
Section
(Installed)
Second Headrail Section
Headrail
Splice Clip
Headrail
Release Tab
Room
Wall
Summary of Contents for Skyline PowerView
Page 1: ...Installation Operation Care Skyline Gliding Window Panels PowerView Motorization...
Page 58: ...Notes...
Page 59: ......
