HunterDouglas Skyline PowerView, Installation Operation Care

Page: 21 / 60

INSTALLATION
19
■
Carefully push the corner fully into place
making sure the fabric goes under the lip of
the corner.
■
Put the return fabric cover on the same way as
the main part of the fabric valance,
sliding it
into place under the lip of the corner.
■
This makes one half of the assembly. Repeat
this process for the other half.
■
Join the two halves together by carefully
inserting the fabric-covered return and valance
into their respective corners.
■
Turn the box valance assembly upside down.
IMPORTANT:
On larger valances, use self-tapping #8 X 3 /
16
" screws to hold the dust
covers together during installation.
■
Set the mounting clips in place. They are 2" to 4" from each end, and 18" to 24" between
intermediate mounting clips as shown.
■
Mark the mounting clip
attachment points (center hole
in the mounting clip). Note that:
➤
All mounting clip release
tabs
must be on the same
side of the box valance
assembly.
➤
The holes in the mounting
clips are on a line 1½"
from the edge of the box
valance assembly.
➤
The mounting clips must
be in a straight line or the
headrail will not mount
correctly.
Lip
18"
-24
"
18"
-24
"
2"-
4"
2"-
4"
Intermediate
Mounting Clip
Release
Tab
1
1
/
2
"
Valance
Dust
Cover
Note: Left Return and
Other Side Removed
for Clarity.
Cloth Cover