OPERATION
48
■
Check the fold and the position of the
plastic adhesive strip.
■
To adjust, remove the plastic adhesive
strip, adjust the fabric.
■
Reattach the plastic adhesive strip,
aligning it with the exact edge of
the panel.
■
Crease the fabric tightly along the strip.
Do not fold more than the width of the
plastic adhesive strip.
■
Slide the panel back into the bottom
weight, making sure the plastic adhesive
strip fits in the groove in the track.
■
Inspect the panel for folds or wrinkles.
■
Once satisfied with the adjustment, slide
the snap slide end cap back into the end
of the bottom weight.
■
Insert the end cap pin back into place in
the bottom weight and press to secure it.
Summary of Contents for Skyline PowerView
Page 1: ...Installation Operation Care Skyline Gliding Window Panels PowerView Motorization...
Page 58: ...Notes...
Page 59: ......
