HunterDouglas Skyline PowerView, Installation Operation Care

Page: 7 / 60

GETTING STARTED
5
■
Box Valance Brackets. A box valance wraps around the
entire headrail. The number of valance brackets will be the same
as the number of installation brackets shown in the table on
page 2.
■
Fabric Valance Mounting Brackets. The number of fabric
mounting brackets will be the same as the number of
installation brackets shown in the table on page 2. These
brackets are only used for outside mounts.
■
Room Divider Kit. This set of parts holds the
panels in place at each end of a Skyline
®
unit used
as a room divider.
Tools and Fasteners Needed
■
Flat blade and Phillips screwdriver
■
Level (laser level is recommended)
■
Measuring tape and pencil
■
Needle nose pliers
■
Power drill and drill bits (
1
∕
4
" hex
driver also recommended)
In addition, you will need fasteners designed to work with your specific mounting surface(s).
■
#6 Hex Head Screws (Provided). Two 1
1
∕
2
" screws are provided per installation bracket.
■
Longer #6 Hex Head Screws (Not Provided).
If using spacer blocks, use #6 screws
long enough for a secure attachment.
■
Wall Anchors (Not Provided).
Use wall anchors when mounting into drywall.
Box Valance
Bracket
Fabric Valance
Mounting Bracket
Room Divider Kit
#6 x 1½"
Hex Head Screw
(Provided)
Longer #6 Hex Head Screw
For Use With Spacer Blocks
(Not Provided)