HunterDouglas Skyline PowerView, Installation Operation Care

Page: 28 / 60

INSTALLATION
26
Outside Mount Valance Installation (Optional)
■
Refer to the appropriate section below for your valance type:
➤
Standard Metal Valance — below
➤
Fabric Valance — page 27
Metal Valance
■
Use the valance brackets provided and put them adjacent to the outside mounting brackets
as shown.
■
Ensure that the release tabs on the mounting
clips, attached to the valance bracket, are facing
the wall as you snap them onto the headrail.
CAUTION: DO NOT put valance returns on the
valance before installing the valance.
■
Hold the valance up to the headrail.
■
Hook the upper clip of the valance
into the upper tab of the valance
bracket.
■
Snap the bottom of the valance
into place in the lower clip.
■
Repeat for all valance brackets.
■
Install the valance returns (if used):
➤
Fit the tabs on the corner end cap
into the notches on the end of
the return. Repeat with the other
return.
➤
Carefully push the return and
corner end cap into place on
the valance.
Wall
Installation Bracket
Valance Bracket
Headrail
Engage
Lip
Snap
into
Place
Release Tab
Room
Wall
Snap in
Bottom
Room
Wall
Upper Tab
Lower
Clip
Hook
Upper
Clip
Valance
(Front of
the Unit)
Tabs
Valance
Return
Corner
End Cap
Notches
1
2