INSTALLATION
43
■
Insert the snap slide into the floor
bracket by aligning the slot of the
bracket with the grooves in the snap
slide. Be sure that the clip portion sits
inside the slot of the floor bracket. This
will allow the snap slide to slip into the
groove in the back of the panel bottom
weight, if desired.
IMPORTANT:
When the snap slide is snapped to the bottom weight, the panels will only
traverse the distance of one panel (see the figure on page 41). To completely traverse
the panels, disconnect the snap slide from the bottom weight.
■
Determine where you want the floor
bracket placed (somewhere along the first
panel), aligned at the same depth as the
wall plate.
■
Secure it in place with #6 flat
head screws.
Clip Inside Bracket
Summary of Contents for Skyline PowerView
Page 1: ...Installation Operation Care Skyline Gliding Window Panels PowerView Motorization...
Page 58: ...Notes...
Page 59: ......
