HunterDouglas Skyline PowerView, Installation Operation Care

Page: 10 / 60

INSTALLATION
8
Inside and Ceiling Mount Applications
For panel order without a valance continue below. If you ordered a valance, see “Inside and
Ceiling Mount Applications WITH A Valance” on page 9.
Inside and Ceiling Mount Applications WITHOUT a Valance
■
Mark the mounting clip locations on the ceiling or inside the window casement. Use the
figure below as a guide for locating the mounting clips.
■
Use a 3 ∕
32
" drill bit to drill holes for the screws.
CAUTION:
Do not mount into drywall, only mount into wood.
■
Use a level to check that the mounting surface is level. Shim the brackets if necessary.
Shims are not provided.
■
Ensure the mounting clips are all facing
the same direction.
➤
Standard Mount — The release
tabs are toward to the window.
➤
Flush Mount — The release tabs
are toward the room to allow for a
flush mounting.
IMPORTANT:
The mounting tabs
will be visible on a flush mount unless
concealed by a valance.
■
Use the hex head screws provided
to fasten the mounting clips to the
mounting surface.
■
Verify that the mounting clips are
mounted level and are aligned to
each other.
Proceed to “Mount the Headrail” on page 23.
2"-4" 18"-24" 2"-4" 18"-24" 18"-24"
Jamb Jamb
Flush Mount Option
Inside Mount (Standard)
Release Tab
Toward Wall
Release Tab
Toward Room
For Closest
Wall Clearance
Ceiling/Top Sill
Room
Wall