Hunter Douglas Douette PowerView, Installation Operation Care

Page: 11 / 44

INSTALLATION – INSIDE MOUNT
9
Inside/Ceiling Mount
Mount the Installation Brackets
■ ■
Mark 8" in from each jamb. This marks the center points of the two end brackets.
■ ➤
Mark the locations of any additional brackets, spaced evenly between the two end
brackets.
■ ■
Center the brackets on your marks and mark the screw holes.
■ ➤
The minimum casement depth for mounting the installation brackets is
1
/
2
". Mark both
of the winged screw holes with shallow mounting depths.
■ ➤
The minimum casement depth for
a fully recessed mount varies with
valance type and fabric pleat size, as
shown in the table. Mark the center
screw hole when depth permits.
IMPORTANT: For the 1
1
/
2
" pleat size, a minimum
1
/
4
" rear clearance is recommended.
■ ■
Drill the screw holes using a
3
/
32
" drill bit.
CAUTION: Use drywall anchors when mounting into drywall. Use the drill bit size
recommended by the manufacturer.
Window/Door Opening
8" Space Evenly
Jamb Jamb
Space Evenly 8"
Minimum
1
/
2
"
Use Center Hole
When Depth Permits
Valance
Type
Fully Recessed Depth
3
/
4
" Pleat 1
1
/
4
" Pleat 1
1
/
2
" Pleat
Aluminum 3
7
/
8
" 4
5
/
8
" 5
1
/
8
"
Alternative
Wood
4
1
/
4
" 5" 5
5
/
8
"