VALANCE INSTALLATION
33
Alternative Wood Valance
■
■
Outside mounts and non-flush inside mounts only:
Use the valance corner brackets to attach a return to
each end of the valance.
■
➤
Fit the tabs on the corner bracket into the notches
on the valance and return.
■
➤
Be sure the mitered corners are flush.
■
■
Headrail widths over 96" with two-piece valances:
Lay the two pieces of the valance on a flat surface and
connect them by placing a dovetail bracket at the seam.
■
■
Attach dovetail brackets to the valance clips.
■
➤
Insert the top of the dovetail bracket into the top of the valance clip.
■
➤
Rotate the dovetail bracket down to snap it in place.
Corner
Bracket
Front of
Valance
Valance
Return
(Cross-
Section)
Notch
Notch
Dovetail
Bracket
Headrail
Dovetail
Bracket
Valance
Squeeze
Summary of Contents for Douette PowerView
Page 43: ......
