INSTALLATION
23
10-Pin Port
6-Pin Port
Connector Orientation
■
■
Reconnect the 10-pin connector to the 10-pin port on the manual control button.
■
➤
There are two ports on the manual control button: one 10-pin port and one 6-pin
port. The 6-pin port is for a dry contact connection to interface with home automation
systems.
■
➤
The pins in the 10-pin port are offset toward the button side of the manual control
button assembly. Be sure to orient the holes on the connector the same way.
IMPORTANT:
Do not force the connector into the port. If the connector is oriented correctly,
it should fit onto the pins in the port with little effort.
■
■
Affix the manual control button to the wall or molding.
■
➤
Peel the backing from the double-sided tape on the rear of the assembly.
■
➤
Press the manual control button onto the mounting surface, as shown.
IMPORTANT:
Choose a location where the manual control button will not be obstructed by
the valance or side rails, and where the wire will not be pinched.
Summary of Contents for Douette PowerView
Page 43: ......
